How to Remove Stains from your Antique China, Pottery and Porcelain
Have you ever passed up purchasing a wonderful piece of art pottery, flow blue, transferware or any other collectible ceramic or porcelain because it had horrible crazing or other stains? I know I have. Condition, condition, condition is the mantra that has been drilled into our heads. Only buy the best when purchasing our collectables and antiques.
However, it is possible to improve the condition of your china, pottery and porcelain finds using a cleaning solution.
Here’s the method I use to make my art pottery, porcelain and china bright and white.
The 40-Percent Peroxide Solution
First, use only 40-percent hydrogen peroxide. This is not the peroxide you buy at the drug store. You need to buy the stronger type that is found at a beauty supply store. Always wear protective gloves to protect your skin from the burning peroxide.
I usually use a good size plastic storage container that can be sealed. I use plastic storage boxes that are large enough to lay a platter flat on the bottom. I will generally purchase 3 to 4 large 32 oz bottles of peroxide and pour into the plastic container. I soak the items sometimes for a month, and up to 6 months. I like my items to be completely covered as they soak.
The peroxide loses strength over time. You will know when to replace the peroxide because it tends to get discolored, and starts to have an odor. The brown crazing is usually old grease that has become trapped in the crazing of the glaze. This old grease darkens with age.
If I have a piece of porcelain that is more delicate, and I don’t want it soaking in peroxide for any length of time, I simply wrap the piece in old white rags soaked in peroxide, only putting the wet rags on the spots that need whitening. I place it in a large trash bag, and seal it. If using trash bag method, the rags will need re-soaking every few days, as they dry out.
Clean Your Pieces Very Carefully
Use great care with any cleaning method. It’s a good idea to try the method on an inexpensive piece before attempting to clean valuable pieces. After you have the piece as clean as you can, wash it with soap and warm water to clean off and residue of the peroxide.
NEVER USE CHORINE BLEACH! This will destroy the pottery, porcelain or ceramic piece. It literally eats it from the inside out. It makes the glaze flake of the piece.
Also, please make sure that you carefully look over any piece that you are going to soak. If restoration or repair has been made on a piece of pottery, porcelain or ceramic, chances are the piece will be ruined in this cleaning process. If in doubt ask a specialist in restorations before you try this.
Along the way, I try not to over-clean a piece. I don’t want to remove all the age; I just want the piece to display nicely. And if I’m careful, that’s just what happens.
Careful Cleaning Gets Great Results
Bear in mind, though, that I have even used this method on a piece of Limoges that was trimmed in gold, and it did not harm the gilt design, even though it was so badly discolored it had to soak for months.
As you’ll see, with patience, a little work and a lot of time, a bargain-priced and slightly-damaged collectible can be cleaned and its value increased.
Maggie Turnipseed is a general Worthologist.
WorthPoint—Discover Your Hidden Wealth