You get exactly what is shown in the first pic.The wing, two sets of scale wheels, 10 exhausts and a couple papers instructions.
As you can see I have started the wing, It had a lot of imperfections so I filled them with Tamiya putty then block sanded and put on a light coat of white sand able primer. I did lightly chase the panel lines with an xacto so they are still present not sanded off, It still has many small imperfections that will need to be filled and sanded.
I didn't like the detail on the center engine nacelle so I cut it off , and planned to use another kit nacelle. Notice the two small "dings" on the right hand trailing edge.
Also very important, the bottom inside front edges of the landing gear bays are not formed so you will need to add a small piece of plastic to complete them, see the red arrows in the last pic to see what I mean.
I have gone to great lengths to photograph and describe this item, however if you have questions please email me and I will do my best to answer them. Cheers, Andy
This is a picture of a He111Z 1, The were used to tow gliders, only 10 were made. It has the wing span of about three Bf109s.
This airplane is not included It is just for reference, to give you and idea of what the wing conversion is for.
Please ask questions before you bid. I would really appreciate payment within 3 days or please contact me. Item will be shipped by United States Postal Service, I will not ship by other carriers.
International buyers welcome, must have confirmed shipping address, email for shipping cost.
Items in the Worthopedia are obtained exclusively from licensors and partners solely for our members’ research needs.