April 5, 2024
Carbon fiber custom knife scales blanks 1/4" from canmanstan.com
Pricing & History
-
Sold for
Start Free Trial or Sign In to see what it's worth.
- Sold Date
- Source eBay
Carbon fiberCustom knife scales blanks2 pieces 1/4"x 2"x 6" inches (+/- 1/16" width and length) (each piece sanded on one side only) (actual items shown) This solid carbon fiber is made up of layers of 670 fabric in a 2x2 twill pattern, each layer alternating 45 degrees from the previous layer. One side of each of these scales is completely flat and has a textured finish (shown in photo), while the other side has been sanded flat (not shown). The sanded side pattern may not be perfectand is not meant to be shown on the knife. This is Aerospace excess carbon fiber. Very tough and void free. SUGGESTED SANDING INSTRUCTIONS With a fine grit wet sand paper and water, sand the textured flat side to just remove the texture. Being very careful not to sand too much (a common mistake) Check your work with water or mineral spirits. You should have the 3d look now.Remove excess thickness from the bottom side of the scalesto achieve final thickness. Or use a liner to increase the thickness. Do not achieve final thickness by sanding from the top side of scales,as your pattern may not turn out as the knife in the sample picture.Buff or apply finish as desired. See our store at for more carbon fiber & micarta knife scales blanks and other handle making materials
Items in the Price Guide are obtained exclusively from licensors and partners solely for our members’ research needs.
If this item contains incorrect or inappropriate information please contact us here to flag it for review.
If you are the originator/copyright holder of this photo/item and would prefer it be excluded from our community, contact us here for removal.
If you are the originator/copyright holder of this photo/item and would prefer it be excluded from our community, contact us here for removal.
