Custom & Rare Harm EP-1 1/5 brushless touring car take a L@@K !

Pricing & History

Sold for
Start Free Trial or Sign In to see what it's worth.
Sold Date
Source eBay

Up for auction is my Cool and Very RARE 1/5 H.A.R.M. EP-1 Brushless car. It was the first mass produced ( so to speak still not that many out there especially in the U.S. ) brushless 1/5 vehicle made starting back in 2003. They Made 3 models by the end of 2006 there last production year buggy, and stadium truck I lucked up and got the only HARM Truck i've ever seen for sale outside a vendor. The reason i am selling is i am in school i am taking a few difficult classes means not much time to play. I have ran it twice outside since i bought it 2 years ago (I have not ran any of my R/C's in Over a year just no time). The car is in good used shape besides body, and tires are worn have tread left but not a lot. Body was thrown in with car seller i bought it from used it on a 1/5 gas which is why rear window has a cut-out section. the front window had holes drilled in upper part of window to vent heat, there is about 1" long crack in rear corner of passenger side quarter panel. Body had pretty crappy paint job on it i just wanted to do something to make it look cooler until i found right body to replace it with. I painted outside of body and rims satin black, and used some silver and chrome pin-stripe i had laying around to detail body along with carbon fiber decals although it's sat long enough and begin moved and shoveled to different shelf for space some of decals starting to peel does not look quite as cool as when i first did it but a new body will fix that anyhoo still a great beater body to use. The stock electronics were fine in EP-1 and ran very well in it and would run high 40's to low 50's with 6s i was running in it. But that was 2003 tech and R/C had progressed alot in 10 years so decided to replace stock electronics. went from the good but hard to program stock ESC to Castle Mamba XL ESC with castle link ( used set-up ounce on road then did bench testing a few times over a year in between other stuff ) still basically new . went from stock motor which was an 36mm X 74mm 1189KPV motor to a :Turnigy Brushless motor XK4082-1500KV Brushless Inrunner Specs. # of poles: 4 Max Amps: 120A Max Volt: 22.2V Max Watts: 2660 Rpm/V: 1500 kv Resistance: 0.0107 ohms No-load Current: 6.3A Dimension: 40mm x 82mm Mounting hole depth: 5.5mm Length of extend Shaft: 16mm Shaft diameter: 5mm Weight: 446g Only used once on road besides bench testing so like new as well. also comes with spektrum sr300 receiver,trinity receiver pack and Hitec HS5735MG 1/4 servo with 264oz of torque at 6v working very nicely in EP-1. The only thing you'll need when you get it is your own spektrum radio or spektrum compatible radio and batteries and you will be ready to go ! everything works as it should new body and tires and this will be a awesome car for someone who will make better use out of it than i did. Any questions at all please,please ASK ! before your bid ! i answer ALL questions with-in 24 hours with body on car is 35" by 16 inches so shipping will not be cheap by will pack well and find cheapest shipper possible definately looks like UPS is way to go . Due to nature of Hobby item being sold as is but will guarantee everything works or refund! I have described everything to best of my ability. I am an honest seller check my feedback and see . Thank for looking and !! O forgot to mention that Car uses 535mm long chassis so will fit any body that size and most H.A.R.M. stuff is F.G. compatible so can get alot of F.G. parts to work on this car ... read more

Items in the Price Guide are obtained exclusively from licensors and partners solely for our members’ research needs.

Flag item for content or copyright

If this item contains incorrect or inappropriate information please contact us here to flag it for review.

If you are the originator/copyright holder of this photo/item and would prefer it be excluded from our community, contact us here for removal.