Handgun sight pusher, for front and rear sights

Handgun sight pusher, for front and rear sights (image 1/4)
Handgun sight pusher, for front and rear sights (image 2/4)
Handgun sight pusher, for front and rear sights (image 3/4)
Handgun sight pusher, for front and rear sights (image 4/4)
Pricing & History
  • Sold for
    Start Free Trial or Sign In to see what it's worth.
  • Sold Date
  • Source eBay
This is a "Universal sight pusher for most handguns with slides, it will adjust/remove/install rear sights and front sights.The aluminum spacer on the bottom can be removed for tall slides and front sights.You may need to shim the slide with a few washers to get the right height.To prevent scuffing the slide I use 2 cleaning patches around the slide before clamping.It has been used on,1911'sGlocksXD'sSigsM&P'sCZ's Sight tool Instructions 1 Wrap slide with cleaning patch or another suitable material to protect slide surface. 2 Insert slide between clamp blocks aligning sight base with sightblade, if needed use washers under slide to achieve correct height. 3 Tighten clamp bolt to secure slide. 4 Use 3/4" wrench to turn adjusting bolt, this will move the sight blade To achieve proper clearance for front sights take out the shim block by removing the screw under the sight tool and follow steps 1 - 4. Lightly oil the adusting bolt and tool frame periodically to prevent rust and insure smooth operation. Will not work on guns with slide mounted safety's unless they are removed.
ebay
Items in the Price Guide are obtained exclusively from licensors and partners solely for our members’ research needs.
If this item contains incorrect or inappropriate information please contact us here to flag it for review.

If you are the originator/copyright holder of this photo/item and would prefer it be excluded from our community, contact us here for removal.