This unit is in good working order. Please
Digital Processing 24 bit A/D and D/A 32-bit DSP
Graphic Equalizer 31 digital filters on ISO 1/3-octave center frequencies, width adjustable from 0.5 to 1.0 octave in .01 octave increments ± 6 or 12 dB boost and cut range Independent display and control of A & B channels
FBX/Parametric Filters Twelve independent digital filters per channel, controlled automatically or parametrically from 20 Hz to 20 KHz, each switchable between FBX fixed filters, FBX dynamic filters, and parametric filters Filter depth: user-controllable in 1 dB steps from +12 dB to -84 dB (parametric mode), 3 dB steps from 0 dB to -40 dB (FBX mode), max. automatic depth adjustable from -6to -40 dB Filter width: user-controllable from 9.99 to .01 octave (parametric), 1.0 to .01 octave (FBX*) Low Cut Filter, user-controllable between 20 Hz and 3 KHz; 12 dB/octave roll-off High Cut Filter, user-controllable between 1 KHz and 20 KHz; 12dB/octave roll-off
Resolution: 1 Hz from 20 Hz to 20 KHz in FBX and parametric mode Time required to find and eliminate feedback: typically 0.3 seconds @ 1 KHz Total number of combined filters active per channel: userselectable, 0 - 12; plus low and high pass filters
Digital Compressor/Limiter Threshold: +30 dBV to -30 dBV in 0.5 dB steps Ratio: 1:1 through infinity Knee: soft/hard Attack: 1 to 100 msec in 1 msec steps Release: .05 to 5 sec in .05 sec steps Peak limits: +30 dBV to -30 dBV in 0.5 dB steps
Digital Delay 1.4 to 1001.0 msec in 20 µsec steps Programmable in milliseconds, feet or meters.
Password Configuration 5 levels
Controls GRQ Remote (RS 232), Remote switching
Save & Recall Configurations 70 user defined 1 factory default 1 most recent configuration (power down save) 1 default front panel
Input/Output GRQ 3102S: Dual channel, one input, one output per channel GRQ 3101S: Single channel, one input, two parallel outputs. Functions on each output selectable via GRQ-Remote Input impedance: Balanced ≥ 10K Ohms, PIN 2 high Output impedance: Balanced 10 Ohms nominal, PIN 2 high Input/Output maximum signal levels: Balanced +29 dBV peak input, Balanced +29 dBV peak output** Output load: (600 Ohms balanced) Bypass: true power-off bypass I/O connectors: XLR-3, ¼” TRS
Performance Frequency response: 10 Hz to 20 KHz, ± 0.2 dB @ +22 dBV THD: <0.01% at 1.0 KHz at +22 dBV with 30 KHz Bandwidth SNR***: >105 dB (with ClipGuard™) Dynamic Range: >110 dB (with ClipGuard™) Headroom: +22 dB peak @ 4 dBV nominal input
Upgrades Operating system firmware stored in Flash RAM. All future upgrades for firmware and software downloadable from Sabine website using GRQ Remote.
Power 50/60 Hz available in 100 V, 120 V, 230 V; 18 W
Dimensions 2-U rack mount: 19 x 3.5 x 9.5 in. (48.3 x 9 x 22.9 cm); 9 lb. (3.9 Kg) 1-U rack mount: 19 x 1.75 x 9.5 in. (48.3 x 4.5 x 22.9 cm); 8 lb. (3.6 Kg)
Forms of Payment: The most preferred form of payment is through Papal. All Major Credit cards are accepted through Papal. Papal is the most preferred and quickest form of payment.Shipping and Handling: see shipping details below. I will ship to US only, through UPS with a delivery confirmation number. Average delivery in US takes 5-7 business days from the day of shipment. All orders take 1-2 days to process before they are shipped. Return and Exchange Policy: All of our products are tested before they are shipped. This unit is guarantee not to be DOA. Shipping and handling is non-refundable. Compatibility Facts: Please check the compatibility before making a purchase or a bid. Feedback: Positive feedback will be left when the merchandise ships out.
Items in the Worthopedia are obtained exclusively from licensors and partners solely for our members’ research needs.