STEVE'S CUSTOM MADE DAMASCUS STRAIGHT RAZOR / KNIFE

Pricing & History

Sold for
Start Free Trial or Sign In to see what it's worth.
Sold Date
Source eBay

Custom Handmade Damascus Steel Straight Razor ||| Buffalo Horn Handle ||| || Damascus Steel Blade with Hollow Ground Edge || | Hand-tooled Custom Made Genuine Leather Sheath | |Size| Blade Length : 2.7 inches After World War II, the manufacturing of straight razors gradually came to a stop. More than 100 years later, a new lineup is being manufactured, reviving the old tradition. The long tradition of high class Damascus knives continues with the new edition of straight razors. At the same time, RockBlade is setting a new technical standard. Thus far, almost no one has dared to produce a Damascus straight razor with more than 180 layers. In the standard forging process, there is a great risk that different layers of steel are exposed at the very fine edge of the blade, thus creating a "micro saw" on the cutting edge. Our Damascus forgers have solved this problem and are forging the RockBlade’s Damascus blades with more than 300 layers of high quality carbon steels. The blade steel guarantees a very high hardness without the danger of chipping. This piece is a must-have for any collector. The Straight Razor in the Photographs is the one that you will receive. TO SEE OUR OTHER AUCTIONS Get your HANDS on it Blade Material ... The materials that we use are mostly an all tool steel mix, but we have in the past, and still do on a regaulr basis use other iron/steels as well as pure nickle and meteoric iron. Traditionally the materials employed were steel and iron, twith the only differences being the carbon and phosphorous content, along with a few other trace elements as well. While this was accpetable 500 to 1000 years ago, in today's world, there are better choices. All blades are 100% hand forged from 1095, 1060, 5160, 1095 Electrite, L-6, 9260 and a few other steels, depending upon use and design. We use no recycled materials, only new stock to make our blades. The steels that we use most are: 1060, 1084, 1095 is traditional and sought after American high Carbon Steel that is prized for knife blade. 5160 , 9260 , L-6/15-N-20 , O-1 , W-2 , WHC, A-2, D-2 , M-2, 1018 , A203D/E , Meteoric Iron, Pure Nickel , Wrought Iron As well as others . We have on a custom basis done hand smelted and refined shear steel blades welded to wrought iron as well. If we can weld it, and it has the properties we need, we can probably use it! Choosing the right material combinations is of utmost importance in pattern welding. We choose our material combinations with cutting ability as the first consideration and then contrast/pattern as a secondary element. Traditionally, this material was made from high carbon and low carbon steels/irons. While this combination mades a very good 500 plus years ago, and while it is still in use today, we we feel that the modern alloys open an entirely new aspect to pattern welding. The use of high nickel/high chrome content medium and high carbon steels can produce vibrant and very striking patterns and contrasts without sacrificing any cutting ability. But the use of these materials can require a great deal of skill...much more than the traditional high/low carbon combinations. One must remember that no matter what materials you are using in the combination, if it will not "stand on its own" as a blade steel, it will not make a superior pattern welded blade. However, there is one exception to this rule and that is in the composite method of blade construction. This technique can allow the use of higher alloy steels that would be otherwise unsuitable for a sword to be used to the material's full effect (Please see our composite section for more information on this below) I personally feel that this material can out cut a homogenous material blade of the same materials due to the fact that you will get a different "wear pattern" on the edge resulting in a "saw tooth" effect to the edge. Now there is a great deal of controversy on this and excellent arguements ar... read more

Items in the Price Guide are obtained exclusively from licensors and partners solely for our members’ research needs.

Flag item for content or copyright

If this item contains incorrect or inappropriate information please contact us here to flag it for review.

If you are the originator/copyright holder of this photo/item and would prefer it be excluded from our community, contact us here for removal.