100% METAL AXLESThese axles are a realistic looking, strong metal design with solid construction for added weight and durability. They feature a 4 gear differential for maximum strength and power transfer. Also included are locking pins to lock the differential for extra traction when needed. The axle features multiple mounting points that can accommodate leaf springs as well as a multitude of link attachments. At the ends of the axle there are simulated brake drums that can be modified to look like disk brakes. The drive hexes incorporate a set screw that holds them on the axle when wheel is not attached. Full ball bearings are included with each axle. A steel ring and pinion gear are the heart of this durable and rigid axle. These axles lend themselves to the custom builder because of their flexibility of installation and extreme quality. For example our axles will fit many other vehicles such as the Tamiya High Lift series, Axial AX10, SCX10, HPI Wheelie King, HPI Crawler King, Tamiya Juggernaut, rc4wd - trialfinder - worminator – timberwolf – subzero – gelande – fracture – diablo – copperhead - as well as almost any other vehicle that uses a separate axle and shaft drive design Accessories Our axles come with all holes filled. Leaf spring mounts and upper link mounts as well as (8) 2mm x 3mm spacers are included. Screws are as follows – (4) 18mm x 3mm, (4) 30mm x 3mm and (8) 3mm locknuts. All hardware is chrome plated for appearance, durability and corrosion resistance. Upper link mount accept 3mm screws. Dimensions Width – 7 3/8 inch hex to hex Brake drum diameter - 30mm Input – 5mm shaft with a flat spot Leaf spring mounts - 79mm wide center to center Drive Hexes – 12mm standard Upper link mount – 19mm wide Wheel shafts – 4mm Lower link mounts – 103mm wide center to center Wheel nuts – 7mm
Items in the Worthopedia are obtained exclusively from licensors and partners solely for our members’ research needs.