Vintage PILOT 602M TUBE Stereo FM RECEIVER EL84 WORKS

  • Sold for: Start FREE Trial! or Sign In to see what it's worth.
  • Item Category: Tools
  • Source: eBay
  • Sold Date: Aug 16,2010
  • Channel: Online Auction

RARE EXAMPLE A REAL SLEEPER

ALL FUNCTIONS AND LIGHTS WORK

TUNER COMES IN VERY WELL

NEW PANEL BULBS

SWITCHES AND POTS CLEANED AND LUBED OPERATE SMOOTHLY

MAGIC TUNING TUBE WORKS

5 12AX7 [ ALL US ]

1 12AT7 [US]

1 12AU7 [US]

4 EL84

SOUNDS VERY CLEAN EVEN WITH OLD CAPS.

ONE KNOB IS NOT ORIGINAL.

FACEPLATE IS IN AMAZING CONDITION

UNIQUE CONSTRUCTION : FACEPLATE HAS SOLID BRASS EXTRUDED FRAME TAPED TO ACCEPT MACHINE SCREWS.IT IS SCREWED ONTO THE CASE FROM BEHIND. THIS ELIMINATES THE TYPICAL GAP BETWEEN FACEPLATE AND CASE. IT ALSO PROVIDES RIGID SUPPORT FOR THE FRONT EDGES OF THE SHEET METAL CASE W THEY MEET THE FACEPLATE. TYPICALLY THESE FRONT EDGES OF THE CASE DEFORM OVER TIME AND NEVER REALLY ALIGN WELL WITH THE FACEPLATE DETRACTING FROM THE FINISHED LOOK. ALL THE EDGES IN THIS UNIT ARE SQUARE AND TIGHT.

ALL LETTERING 100% INTACT

BUILT-IN MANUALLY SWITCHED MULTIPLEX UNIT

15 WATTS PER CHANNEL

2 PHONO INPUTS

CENTER CHANNEL OUTPUT

4-8-16 OHM SPEAKER TERMINALS

HUM BALANCE POTS FOR EACH CHANNEL IN REAR

WILL PASS ON EXACT SHIPPING CHARGE 26 LBS DOUBLE BOXED

GUARANTEED TO ARRIVE AS DESCRIBED

UNIQUE SIMPLI-MATIC TEST PANEL IN REAR

Unbalance in output tubes results in deterioration of low frequency performance. This unbalance may occur because of tube aging or replacement. Many high quality amplifiers have balance controls but require a meter or distortion analyzer to indicate the required adjustment. The Pilot 602 has such balance controls and has in addition the exclusive SIMPLI-MATIC test panel that allows you to make the adjustments without external meters. With the VOLUME control set to minimum, press and release the channel A test button on the SIMPLI-MATIC panel and listen for clicking sounds from the channel A speaker. If you do not hear any, then the channel A output tubes are balanced . If you do hear clicks, rotate the channel A DC Balance Control until none are heard when the button is repeatedly pressed and released. Repeat this procedure using the channel B button, speaker and Balance Control. If no adjustment is possible and the output tubes will not balance, then one or both should be replaced

Items in the Worthopedia are obtained exclusively from licensors and partners solely for our members’ research needs.