CFK USA Custom Handmade PINK Patina-Color Damascus Small Skinning Bone EDC Knife

CFK COLOR PATINA : This knife is special. We high polish the Damascus blade first. Instead of burning the sides of the blade with ACID, we heat the blade in a special oven at a certain temperature and turns the sides of the Damascus blade Golden-Pink. This Patina will last a lifetime on the surface of the blade as long as you do not polish it off or dip the blade in acid. The patina-color is beautiful and shows off the layers of the steel magnificently.

SHIPPING CODE: 17CFK-F22
512 LAYER (1095HC & 15N20) PATINA COLOR DAMASCUS FULL TANG STEEL BLADE,
THE KNIFE HAS EXOTIC CAMEL BONE HANDLES
WITH MOSAIC & BRASS TUBE PINS & BRASS LANYARD HOLE
7 3/8" OVERALL
3" BLADE
3 1/4" CUTTING EDGE
3/16" BLADE THICKNESS
1 1/4" BLADE WIDTH
3 3/4" FINGER GROOVE HANDLE
6 OUNCES
KNIFE COMES WITH A CERTIFICATE PAPER
THE SHEATH IN THE PHOTOS COMES WITH THE KNIFE

COLOR PATINA : This knife is special. We high polish the Damascus blade first. Instead of burning the sides of the blade with ACID, we heat the blade in a special oven at a certain temperature and turns the sides of the Damascus blade Golden-Pink. This Patina will last a lifetime on the surface of the blade as long as you do not polish it off or dip the blade in acid. The patina-color is beautiful and shows off the layers of the

CFK DAMASCUS STEEL: All our Damascus is real and not just an acid etch. Damascus is a mixture of 1095HC or 1084HC and 15N20 nickel carbon. You heat them up together and then fold the bar over and over to get the desired layers, ours are 512 layers. Then you burn the blade in acid, and it turns the nickel satin color and the high carbon turns blackish gray. This is how the layers are exposed to show the layers of the new steel created coined "Damascus". All Damascus is acid etched to show the layers. If you high polish the metal it will be shinny satin like all steels. Only after you burn the sides of the blade with acid do you see the layers of the two steels. Makes sense? After we make our knives we high polish the handles and put an edge on the blade. The high polishing buffs off the acid burned layer of the handle, and the blade edge is sharpened and the acid burned edge becomes satin. You can re-burn the tang of the blade near the handles and the edge of the blade and it will show the layers once more.
NOTE : CFK/IPAK's craftsman hand craft all knives and they do not use any CNC machining. CFK/IPAK knives are not perfect CNC looking knives. As a result these knives will have handmade qualities, unique characteristics, that make the knives 100% unique.
ATTENTION! CFK has two eBay seller accounts. CFK-SAMPLE-KNIVES and CFK-CUTLERY-COMPANY. These are separate entities and the sales are not transferable. We will not combined sales of both accounts into one shipping box.

CFK & IPAK POLICIES AND FINE PRINT

WELCOME TO CFK

CFK Cutlery Co. is a private knife manufacturer for the CFK knife brand. We sell our entire handmade knife inventory below dealer wholesale, direct to our customers. There are never any dealer mark-ups or retail catalog mark-ups added, we pass these savings onto you. We believe we have the highest quality handmade knives on eBay & Amazon. Look no further for the best value for your money.

WHAT WE DO

CFK sources its metals from Germany, Japan, and Sweden and our handle materials are sourced from all over the world, including the USA. The knives are handmade in the UK by a contract knife company. The finished knives and leather sheaths are then imported to the United States. We use several USA craftsmen (Yellow Hawk or SC Holsters) to handcraft leather and kydex sheath systems for our customers. We are fortunate to have famous Navajo's Brian & David Yellowhorse to customize many of our finished blades and we also have other professional knife makers customize our blades from time to time.

SECONDS AND KNIVES SOL...
... read more