NEW! HPI Racing 1/8 Savage Flux HP Brushless 2.4GHz RTR

On-line Videos: Video 1

STOCK# - HPID4240 MFG# - 104240 New and unused. In the original manufacturer packaging.
This ships FREE within the U.S. when using ground service. If ordering it
you may add more items to your order without incurring any shipping charges
if shipped within the U.S. using ground service.
If shipping internationally please allow 2 to 4 weeks for delivery.
Not all international packages are shipped with tracking information.

This is the brushless electric powered 2.4GHz radio controlled ready to run
1/8 scale HPI Savage Flux HP Monster Truck.

FEATURES: Chassis: Rigid 6061-series aluminum TVP (twin vertical plate) 0.098
(2.5mm) thick extra low CG for high degree of control and
cornering ability included wheelie bar twin battery boxes hold a
variety of battery types
Drive: Four wheel shaft
Brushless Motor: HPI Flux Tork 2200Kv with machined cooling fins 5mm
shaft handles up to 25V of power held in place with two machined
8mm billet aluminum clamps and 0.12 (3mm) thick 7075 billet
aluminum motor mount
Radio: HPI TF-20U 2.4GHz with steering and throttle trim and reverse
and dual rate adjustment transmitter does not have charge jack
Electronic Speed Control: HPI Flex Blur with reverse programmable
integrated cooling fan and up to

INCLUDES: Assembled 1/8 scale HPI Savage Flux HP Monster Truck with Flux Tork
2200 brushless motor Flux Blur ESC HPI 2.4GHz radio system SF-5
high torque metal gear steering servo painted & trimmed body
wheelie bar instruction manual and HPI RC Cars DVD

REQUIRES: AA Batteries: Six for transmitter
Batteries: Two NiMH (up to 8-cell flat or stick packs) with Deans
connectors or 2S or 3S LiPo hard case battery packs 25C minimum
(both batteries must be the same type voltage and capacity)
Battery Charger: Depending on type of batteries selected
Building and track equipment

SPECS: Vehicle-
Length: 21 (533mm)
Width: 16.8 (427mm)
Height: 10 (254mm)
Front and Rear Track: 16 (406mm) outer edges of tires side to side
Front and Rear Tread: 13.1 (332.5mm) center of tires side to side
Wheelbase: 13.6 (345mm)
Length: 19.2 (487mm)
Width: 8.5 (216mm)
Height: 5 (127mm)

COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x16mm Differentials 1 HPIC2032
2 8x16mm Differentials 1 DTXC1585
4 8x16mm Front Uprights 2 DTXC1585
4 8x16mm Rear Uprights 2 DTXC1585
2 8x16mm Bevel Gear 1 DTXC1585
2 10x15mm Wheely Bar 1 DTXC1595
2 6x13mm Drive Shaft 1 DTXC1573
1 6x13mm Gear Shaft 1 DTXC1573
1 8x16mm Gear Shaft 1 DTXC1585
1 6x13mm Idler Gear 1 DTXC1573

jxs 03/01/10


FEEDBACK: Please contact us first if you feel that you cannot give us
ratings of 5 in all categories. We make overall customer satisfaction
our #1 priority and would appreciate the opportunit...

... read more