Tamiya High Lift Upgrade Axles w/ Free Priorty Ship

This a brand new pair of some of the Coolest ALL Metal axles to hit the Market for the 1/10- 1/18 Scale Crawler craze!! These Power Racing Axles not only look awesome but they perform like they look, Locker or Open Diff, Absolutely Unbelievable !!! These will complete the finest looking Scalers , project, crawler or trail truck you care to build. You cant find a better looking set of scale axles, at this price, anywhere! These come set up and are ready to accept leaf springs to boot! These are Fully interchangeable with most Tamiya, HPI and Axial Crawlers as well as alot of other Brand R/Cs with a 5mm shaft, they are also a very standard 12mm hex, so any wheel like those is ready to bolt right on!! no fabbing there! . Just under 7" from face plate to face plate about 8" wheelbase with standard width and offset wheels, but obviously thats fully customizable as well! *** These axles come setup as a standard open diff for Scalers and Trials, but these axles can easily be locked with optional(supplied) locker pins which make these more than Competition worthy for Pro Comp Crawling, Ball bearings through out , Hands down some of the finest axles available on the market!! This is for 1 Front and 1 rear axle set, complete with steering links!! Photo#2 shows them under a Seriously Cool all metal Scaler by Power Racing( which we also

These axles are a realistic looking, strongmetal design with solid construction for added weight and durability. They feature a 4 gear differential for maximum strength and power transfer. Also included are locking pins to lock the differential for extra traction when needed. The axle features multiple mounting points that can accommodate leaf springs as well as a multitude of link attachments. At the ends of the axle there are simulated brake drums that can be modified to look like disk brakes. The drive hexes incorporate a set screw that holds them on the axle when wheel is not attached. Full ball bearings are included with each axle. A steel ring and pinion gear are the heart of this durable and rigid axle. These axles lend themselves to the custom builder because of their flexibility of installation and extreme quality. For example our axles will fit many other vehicles such as the Tamiya High Lift series, Axial AX10, SCX10, HPI Wheelie King, HPI Crawler King, Tamiya Juggernaut, rc4wd - trialfinder - worminator – timberwolf – subzero – gelande – fracture – diablo – copperhead - as well as almost any other vehicle that uses a separate axle and shaft drive design


Our axles come with all holes filled. Leaf spring mounts and upper link mounts as well as (8) 2mm x 3mm spacers are included. Screws are as follows – (4) 18mm x 3mm, (4) 30mm x 3mm and (8) 3mm locknuts. All hardware is chrome plated for appearance, durability and corrosion resistance. Upper link mount accept 3mm screws.


Width – 7 3/8 inch hex to hex Brake drum diameter - 30mm

Input – 5mm shaft with a flat spot Leaf spring mounts - 79mm wide center to center

Drive Hexes – 12mm standard Upper link mount – 19mm wide

Wheel shafts – 4mm Lower link mounts – 103mm wide center to center

Wheel nuts – 7mm

Free US Prio...
... read more