VINTAGE SANSUI MODEL 1000A RECEIVER 50W PER CH WORKING


VINTAGE SANSUI MODEL 1000A RECEIVER 50W PER CH WORKING

Up for sale is a very nice ready to play Sansui Model 1000a 100 watt (50 watts per channel) Stereo Receiver. It has been gone thru, controls/switches all cleaned with Deoxit cleaner and finished with Deoxit Gold. I have replaced all electrolytic and oil capacitors on the chassis, MPX board and both phono preamp boards. All inputs, aux, phono 1, phono 2, mic, have been hooked and checked out to make sure that they work.

I rebuilt all 4 of the cans instead of wiring new electrolytic capacitors underneath. I cut the cans at the bottom, separated them, cleaned them all out and installed new caps inside. I then seal them back together and shrink tube them to complete them. I installed them back in and wired them back into the chassis. I then replaced all the oil caps on the chassis with new caps. I also installed 1 ohm resistors in the cathode circuit so I could monitor the current on the output tubes. I replaced all the electrolytic caps, oil caps and the 4 coupling capacitors. I then cleaned and protected all the controls and switches with Deoxit before proceeding. I tested all the tubes and made sure that they were all good. I ran it at full voltage for several hours before putting the tubes back in and brought it up slowly with the variac and everything was fine.
... read more