Yamaha SPX 990

Yamaha SPX 990 Multi-Effects Unit Used SPX 990 for sale by Carlson Audio, the largest Audio Production company in the Northwest Slid in and out of several racks but it great working condition Power Cable is hardwired to unit Rack ears are slightly bent and cracked but still able to put in a rack without problems MANUFACTURER'S INFO
Features Advanced Hardware for Superior Sound

The latest 20-bit analog-to-digital and digital-to-analog conversion technology-sampling at 44.1kHz. Frequency response extends all the way from 20 Hz to 20 kHz; dynamic range is an extraordinary 106dB; noise and distortion are neglible.

Stereo Configuration with Balanced Inputs and Outputs

A true 2-in/2-out stereo configuration that allows stereo sources to be processed without disrupting the original stereo image. Stereo inputs and outputs are all electronically balanced, with XLR and TRS phone jack connectors.

Preset, Internal, and Card Memory

180 memory locations "on board". 80 of these are read-only memory. The remaining 100 are writable memory locations. Plug-in memory cards hold an extra 100 effect programs each.

Three-stage Effect Configuration

In addition to the main effects, the SPX990 provides programmable pre and post effects that can be used to refine and polish your sound.

In-depth Programming Power


Tempo-based Delay Time Programming

Delay time parameters can be programmed in terms of tempo or note length. Delay time can also be entered via a footswitch or MIDI clock data.

Superior Pitch Precision

The SPX990 achieves faultless pitch tracking through a new dynamic waveform analysis technique. In addition to the simple parallel pitch tracking the SPX990's "intelligent" pitch change creates appropriate harmony based on a specified key and scale type.

External Parameter Control

The SPX990 allows two selected parameters from each program to be assigned to two external MIDI controllers.

MIDI Control

The SPX990 allows MIDI selection of all programs, and real-time control of up to two selected effect parameters at the same time.

4 Pre-Effects

1. 3-band PEQ *1, 2. Compressor *1, 3. Harmonic Driver *1, 4. Compressor, Dist. and EQ *3 *1= 2 IN - 2 OUT, *2 = 1 IN - 2 OUT, *3 = 1 IN, 1 OUT

36 Main Effects: Reverb, Early Reflections, Delay and Echo, Modulation

REVERB: Reverb *2, Filtered Reverb *2, Stereo Reverb *1, Echo Room *2; EARLY REFLECTIONS: Thin Early Reflection *2, Fat Early Reflection *2, Gate Reverb *2, Reverse Gate *2; DELAY and ECHO: Delay L, C, R *2, Echo *2, Multi Tap Delay *2, Stereo Echo *1, Tempo Mono Echo *2, Tempo Stereo Echo *1, Tempo Quad Echo *1; MODULATION: Flanger *1, Dual Flanger *1, FM Chorus *1, AM Chorus *1, Phaser *1, Symphonic *1 *1= 2 IN - 2 OUT, *2 = 1 IN - 2 OUT, *3 = 1 IN, 1 OUT

Main Effects continued: Pitch Change, Pan, Complex Effects, Freeze

PITCH CHANGE: Mono Pitch Change *3, Dual Pitch Chance *2, Triple Pitch Chance *2, Stereo Pitch Change *1; PAN: Auto Pan *2, Triggered Pan *2; COMPLEX EFFECTS: Chorus and Reverb *2, Symphonic and Reverb *2, Flanger and Reverb *2, Reverb (L) / Reverb (R) *1, ER (L)/ Reverb (R) *1, Echo (L) / Reverb (R) *1, Chorus (L) / Reverb (R) *1, Pan (L) / Pan (R) *1; FREEZE: Freeze *3 *1= 2 IN - 2 OUT, *2 = 1 IN - 2 OUT, *3 = 1 IN - 1 OUT

3 Post Effects

1. 3-band PEQ *1; 2. Compressor *1, Harmonic Driver *1 *1 = 2 IN - 2 OUT

Specifications Frequency Response 20 Hz - 20kHz +/-0.5 dB CD Player Dynamic Range Above 100 dB (typical 106dB) Specifications Hum and Noise Below -82 dBm (Typical -88dBm) Distortion Below 0.005% at max. level 1 kHz Input/ Number of Channel 2 (Phone Jack) Input/ Nominal Level +4/-20dBm (Switchable) Input/ Highest Input +24dBm (Switchable at +4dB) Input/ Impedance 20 k ohm Output/ Number of Channel 2 (Phone Jack) Output/ Nominal Level +4/-20dBm (Switchable) Output/ Highest Output +18dBm (Switchable at +4dB) Output/ Impedance 150 ohm A/D Conversion 20 bits D/A Conversio...
... read more