Canon High quality EN22 Flat can motor 18 by 33 has 5 skewed poles 2 mm shaft

Pricing & History

Sold for
Start Free Trial or Sign In to see what it's worth.
Sold Date
Source eBay

The listing is for a complete new surplus motor taken from original factory crates and the armatures are shown for clarity about the 5 skewed poles. This is a high quality Canon 1833 flat can single shaft Motor with 5 skewed poles. This motor is 18 mm wide by 22 mm high by 32.8 mm long. It has a 2 mm shaft and only draws 40 milliamps at 12 volts And cranks about 9,000 rpmThe high quality 5 pole skewed armature motor will reduce coggong and with sleeving a flywheel is possible. See Microloocomotion's store for double shaft similar mjotors and versions with sleeves and flywheels.I have another Ebay listing for a double shaft Igarashi with 5 skewed poles and dual 2 mm shafts with or without flywheel custom made to fit your space.The magnets are high quality as the amp draw is only 50 milliamps at 12 volts!! These type of iron core motors have been used in High end brass for years! 5 skewed poles is hard to beat.See Micro LocoMotion's store for the same quality motor also available in a double shaft version with 5 skewed poles 18 by 24 by 33 andalso 26 mm cylindrical by only 25 mm long.Canon makes coreless motors 1231/1434 and 1826 and 1837 here are the listings:Micro LocoMotions other Canon and similar listingsdouble shaft Iron Core 1833 flat can with skewed armatureThis is a high power flat can motor and is ideal for brass or plastic loco diesel or steam locos. Due to the skewing it flywheels a few seconds and that is enough to coast you through switchwork for several inches to prevent stalling the steam or diesel locomotive through dirty or rough track.Flywheels are available from the motorman to fit your size.Check my other Ebay listings for the same motor with flywheelsThis motor has 2 sets of bolt holes on 15 mm diameter bolt circle.Fits Large HO steam road engines and most all single shaft applications. It is 18 mm wide (.71 inches) 22 mm high (7/8ths inch) and 33 mm long (1.3 inches). That should fit most S scale and O scale, ON3 and SN3 Narrow gauge diesel and steam.S scale HO Scale ON3 O ScaleThis motor delivers about 2 oz inches stall torque (MNM converts to Oz inches by dividing by 7).These motors flywheel a fewseconds because t hey have skew windings minimizing cogging and with a flywheel your locomotive will coast a few inches through dirty or rough trackwork!! Motorman can make custom flywheels to fit your space dramatically improving the non cogging effect!!This is a powerful motor and it will fit a lot of Steam, The motor will fit large Rivarossi HO steam.These motors will power the older HO Rivvy mallett, cab forward, challenger or big boy!! With the offset drive system. Dual motors are available in other ebay listings which will work with U joints to both gear towers, and even an offset gearhead in my current Ebay listings.The HO Cab Forward on The Motorman's website has coreless 16 mm by 24 motors with center shaft gearheads in 6.3 ratio and required milling of the chassis---A single motor at the rear may be easier to install. 2 of the 2020 or 2630 gearmotors motors will work. See other listings for these motors.If you have questions you may email motorman at micro-loco-motion dot comFlywheels help model when the power is interrupted so takes you through dirty track and prevents stalling. Many more precision coreless motors and swiss gearheads available from the motorman See all of my listings!!** Remotoring is for the advanced hobbyist who has the experience to understand the Engineering of locomotive scale speed and novice hobbyists may find the techno babble over there heads. Quality motors are more expensive because they have more poles and better magnets and iron cored motors need to be skewed and have 5 or more poles to eliminate cogging. These motors can be expensive in small quantities from the US factory importer!!25.4 mm is 1 inch to convert divide by this factor or its inverse is .0393716 mm divided by 25.4 or .6299 inch... read more

Items in the Price Guide are obtained exclusively from licensors and partners solely for our members’ research needs.

Flag item for content or copyright

If this item contains incorrect or inappropriate information please contact us here to flag it for review.

If you are the originator/copyright holder of this photo/item and would prefer it be excluded from our community, contact us here for removal.