GEFEN GTB-HDBT-POL-BLK HDMI EXTERNDER W/POL NEW IN BOX

Pricing & History

Sold for
Start Free Trial or Sign In to see what it's worth.
Sold Date
Source eBay

This is a Gefen GTB-HDBT-POL-BLK-CO HDMI extender. It is new in the box. I have it listed as new other because.... I did a project earlier this years where I used 12 of these systems. 1 of the systems had a problem with the receive end. I got another system and used the receive end from it and everything worked fine. This is a great HDMI extender. I send the bad receiver back to Gefen to have it repaired. I included the transmitter from the new system I had bought so I could send them a complete system. Gefen sent this new system to me. It is not the same system I sent to them as the send and receive units have the same serial numbers. So I am not sure if these are brand new or factory refurbished. I have them priced to sell as I need to close out the boxes on the build. Shipping will be $16.00 to the lower 48 states. Please email any questions and I will do my best to answer them.Here is the factory info on this system:HDBaseT Extender for HDMI using one CAT-5e or CAT-6 cable up to 230 feet (70 meters)The GTB-HDBT-POL uses Gefen's implementation of the HDBaseT™ technology to extend HDMI at resolutions up to 4K Ultra HD 60 Hz 4:2:0 and 4K DCI (Cinema), along with 7.1 channels of HBR (High Bit Rate) lossless digital audio. Extension range at 1080p Full HD is up to 230 feet (70 meters) using one CAT-6 cable or up to 198 feet (60 meters) using one CAT-5e. This product provides 2-way IR extension between the Sender and the Receiver unit, allowing IR communications between the source and the viewing location. 2-way IR can be used to control A/V sources placed near the Sender unit and to send automation commands to the display or any other device placed near the Receiver unit. Gefen POL (Power Over Line) technology powers the Receiver unit using the same cable that extends the HDMI signal. This feature eliminates the need for an external power supply for the Receiver unit and simplifies installation.How It WorksConnect the Sender unit to the Hi-Def source using an HDMI cable. Use another HDMI cable to connect the Receiver unit to the HDTV display. Connect a single CAT-6 cable up to 230 feet (70 meters) or CAT-5e cable up to 198 feet (60 meters) between the Sender and Receiver units. Connect the included 24V DC power supply in to the Sender unit and plug the power supply to an available electrical outlet. Power to the Receiver unit is delivered from the Sender unit over the CAT-5e/6 cable using Gefen POL technology. To control the Hi-Def source from the display location, connect an IR Extender (Gefen part no. EXT-RMT-EXTIRC) to the Ext IR connector on the Receiver unit. Connect an IR emitter (Gefen part no. GTB-IREMIT) to the IR Out of the Sender unit and place the IR emitter over the IR sensor of the Hi-Def source. Point the IR remote at the IR Extender to control the Hi-Def source. For IR control of a device placed near the Receiver unit (such as the display), connect the IR output from an automation device (such as the Gefen PACS or Mini PACS) to the IR In connector on the Sender unit. Connect an IR emitter (Gefen part no. GTB-IREMIT) to the IR Out on the Receiver unit and attach the IR emitter to the IR sensor of the device being controlled.Features Extends 4K Ultra HD (3840 x 2160 @ 60 Hz 4:2:0, or 30 Hz, 4:4:4) and Bi-Directional IR up to 130 feet (40 meters) over a single CAT-5e cable (8-bit color) Extends 4K Ultra HD (DCI) (4096 x 2160 @ 24 or 30 Hz 4:4:4) and Bi-Directional IR up to 130 feet (40 meters) over a single CAT-5e or CAT-6 cable Extends HDMI at 1080p Full HD and Bi-Directional IR up to 230 feet (70 meters) over a single CAT-6 cable, or up to 198 feet (60 meters) over CAT-5e cable HDMI Features Supported: HDMI 2.0 HDCP 2.2 and 1.4 12-bit Deep Color LPCM 7.1 audio, Dolby® TrueHD, Dolby Digital® Plus, and DTS-HD Master Audio™ 3DTV pass-through CEC pass-through Lip Sync pass-through Bi-Directional IR extension Gefen POL feature provides power to the Receiver unit over the CAT-5e Uses HDBaseT™ technology Locking power connector Easy surface mounting Specifications Maximum Pixel Clock: 300 MHz Video Input Connector (Sender): (1) HDMI Type A 19-pin, female, locking Video Output Connector (Receiver): (1) HDMI Type A 19-pin, female, locking Link Connectors (Sender/Receiver): (1) RJ-45, shielded Power/HDCP Indicator LED (Sender/Receiver): Bi-color: Blue/Amber IR Extender port (Receiver): (1) 3.5mm mini-stereo jack IR Out port (Sender/Receiver): (1) 3.5mm mini-mono jack IR In port (Sender): (1) 3.5mm mini-mono jack Power Supply: (1) 24V DC, locking Power Consumption: 24W (max.) Dimensions (W x H x D) (Sender / Receiver): 4.3" x 1" x 3.2" (110mm x 26mm x 80mm) Shipping Weight: 4 lbs. (1.8 kg) read more

Items in the Price Guide are obtained exclusively from licensors and partners solely for our members’ research needs.

Flag item for content or copyright

If this item contains incorrect or inappropriate information please contact us here to flag it for review.

If you are the originator/copyright holder of this photo/item and would prefer it be excluded from our community, contact us here for removal.