Radio Design Labs ST-EQ3 3 Band Audio Equalizer USEd
Pricing & History
-
Sold for
Start Free Trial or Sign In to see what it's worth.
- Sold Date
- Source eBay
Brand New - Normally Sells for around $100 Each3-Band Audio Equalization Custom Tailored Audio Bandwidth Adjust To Pass Voice-Band Audio Adjust To Produce Smile-Curve for Music Low Noise and Low Distortion Equalization APPLICATION: The ST-EQ3 features a balanced bridging input, which may be connected unbalanced if desired. The output driver is 150 Ω balanced, and is intended to drive unbalanced or balanced lines of 150 Ω or higher impedance. Equalization is accomplished by three active circuits, each controlling a separate audio band. These bands were carefully selected to yield a module that works effectively in a wide variety of systems. Setup of the ST-EQ3 is assisted by a peak overload LED which indicates excessive pre or post EQ levels.Typical Performance: Input:100 kΩ balanced or unbalanced bridging; line-levelGain:OFF to unity (adjustable, +/- EQ adjustment)THD+N:< 0.030%; 0.010% typical (1 kHz flat response)CMRR:> 60 dB (100 Hz)Frequency Response:Into 600 Ω:20 Hz to 22 kHz (EQ set flat; +/- 0.5 dB)Into bridging load:10 Hz to 22 kHz (EQ set flat; +/- 0.5 dB)Noise:< -80 dB (below +4 dBu)Center Frequencies:LOW Band: 80 HzMID Band: 1 kHzHIGH Band: 30 kHzBandwidth at 3dB EQ:LOW Band: 20 Hz to 300 HzMID Band: 200 Hz to 7 kHzHIGH Band: 3 kHz to 30 kHzPower Requirement:GROUND-REFERENCED, 24 to 33 Vdc @ 25 mA The free listing tool.
read more
Items in the Price Guide are obtained exclusively from licensors and partners solely for our members’ research needs.
If this item contains incorrect or inappropriate information please contact us here to flag it for review.
If you are the originator/copyright holder of this photo/item and would prefer it be excluded from our community, contact us here for removal.
If you are the originator/copyright holder of this photo/item and would prefer it be excluded from our community, contact us here for removal.