ReyLight LANapple - Ti

Pricing & History

Sold for
Start Free Trial or Sign In to see what it's worth.
Sold Date
Source eBay

ReyLight LANapple - Ti ReyLight LANapple - Ti Max 600 lumens. Light comes with a rechargeable 14500 battery. (Unprotected, button top cell is suggested. Protected one is longer, it might give too much pressure to the spring and cause an issue.) Eneloop NiMH and Alkaline AA works well too. （Energizer Lithium Primary 1.5V battery might have a problem. The inside of it is still lithium, and the voltage and discharging current is limited.） Specs: Material: Titanium Nichia 519a 4000K Reverse polarity protection LVP (low voltage protection) for Li-ion battery Temperature control to avoid overheating problems Anti-reflective coated lens Aluminum alloy reflector Easy clicky switch operation Tail-stand capability Pocket clip Dimensions: 3.8 x 0.8 in (9.7 x 2.16 cm) Spare O-rings 1 tritium slot at tail switch. Programming Guide 1. Turn on the light. 2. Press the button 8+ times. The light will now blink once, then strobe, blink twice, then strobe, blink three times, then strobe...After 5 blinks and a strobe, the sequence repeats. a. 1 blink: mode group selection. Press the button to enter this menu. i. 1 blink: (ML)-2%-20%-100% ii. 2nd blink: (ML)-10%-40%-100% iii. 3rd blink: (ML)-2%-10%-50% iv. 4th blink: (ML)-50%-100%-strobe-SOS It then repeats. Press the button during any blink to select that mode group. b. 2 blinks: mode memory on-off toggle (default off). Press the button during the two blinks or during the strobe after to turn mode memory on. Repeat to turn mode memory off. c. 3 blinks: moonlight mode off-on toggle (default on). Press the button during the three blinks or during the strobe after to turn moonlight off. Repeat to turn moonlight on. d. 4 blinks: mode order toggle (default LMH). Press the button during the four blinks or during the strobe after to change the mode order from Low Medium High to High Medium Low. Repeat to reverse the order. e. 5 blinks: factory reset. Press the button during the five blinks or during the strobe after to reset the light to factory settings. Shorcut: quick double tap to turbo. ReyLight LANapple - Ti ReyLight LANapple - TiMax 600 lumens.Light comes with a rechargeable 14500 battery. (Unprotected, button top cell is suggested. Protected one is longer, it might give too much pressure to the spring and cause an issue.)Eneloop NiMH and Alkaline AA works well too.（Energizer Lithium Primary 1.5V battery might have a problem. The inside of it is still lithium, and the voltage and discharging current is limited.）Specs:Material: Titanium Nichia 519a 4000K Reverse polarity protection LVP (low voltage protection) for Li-ion battery Temperature control to avoid overheating problems Anti-reflective coated lens Aluminum alloy reflector Easy clicky switch operation Tail-stand capability Pocket clip Dimensions: 3.8 x 0.8 in (9.7 x 2.16 cm) Spare O-rings 1 tritium slot at tail switch.Programming Guide1. Turn on the light.2. Press the button 8+ times. The light will now blink once, then strobe, blink twice, then strobe, blink three times, then strobe...After 5 blinks and a strobe, the sequence repeats.a. 1 blink: mode group selection. Press the button to enter this menu.i. 1 blink: (ML)-2%-20%-100%ii. 2nd blink: (ML)-10%-40%-100%iii. 3rd blink: (ML)-2%-10%-50%iv. 4th blink: (ML)-50%-100%-strobe-SOSIt then repeats. Press the button during any blink to select that mode group.b. 2 blinks: mode memory on-off toggle (default off). Press the button during the two blinks or during the strobe after to turn mode memory on. Repeat to turn mode memory off.c. 3 blinks: moonlight mode off-on toggle (default on). Press the button during the three blinks or during the strobe after to turn moonlight off. Repeat to turn moonlight on.d. 4 blinks: mode order toggle (default LMH). Press the button during the four blinks or during the strobe after to change the mode order from Low Medium High to High Medium Low. Repeat to reverse the order.e. 5 blinks: factory reset. Press the button during the five blinks or during the strobe after to reset the light... read more

Items in the Price Guide are obtained exclusively from licensors and partners solely for our members’ research needs.

Flag item for content or copyright

If this item contains incorrect or inappropriate information please contact us here to flag it for review.

If you are the originator/copyright holder of this photo/item and would prefer it be excluded from our community, contact us here for removal.