RUSTINS CLEAR SATIN VARNISH 250ML QUICK DRY FREE POST

Pricing & History

Sold for
Start Free Trial or Sign In to see what it's worth.
Sold Date
Source eBay UK

RUSTINS CLEAR SATIN VARNISH 250ML QUICK DRY FREE POST RUSTINS QUICK DRYING INTERIOR CLEAR VARNISH 250ML Rustin’s quick-drying, hard wearing coating for all interior woodwork, has the least effect on the colour of the wood. Low odour non-toxic and touch dry in 20 minutes, re-coatable in 2 hours. Clean brushes in water. Available in gloss, satin and matt finishes. Product Acrylic Varnish Type Water-based acrylic emulsion. The varnish looks milky-white whilst liquid but dries to a hard, durable transparent finish, resistant to water and alcohol. Intended Use Interior, bare woodwork, cork, hardboard. Can also be used as a sealer for concrete, brickwork and plaster. For floors use Rustin ’ s Acrylic Floor Coating . Special Features Low odour, quick-drying, non-yellowing on ageing. Wash brushes in water. Has very little effect on the colour of wood it is applied to. Conforms to Safety of Toys Regulations BS EN 71 Part 3 1995 . Preparation Surfaces must be clean and previous coatings should be removed with Rustins Strypit Paint and Varnish Stripper . It is advisable to clean old surfaces with White Spirit to remove any wax or contamination, wipe away the solution formed with clean kitchen paper towels. Bare wood may be dyed with either Rustins Wood Dye or Floor Dye before varnishing (see Compatibility section below). Application Synthetic brush, Varnish Roller or Spray (can be diluted with water about 10% if necessary for spraying, or if the temperature is high). Coats 2 or 3. Lightly sand after 1 st coat to flatten any raised grain. Drying Time Touch dry in 20 minutes typically, depending on temperature and humidity. Re-coating Time Re-coat after 2 hours. Application Temp. Ideally 15-25 ° C, do not use below 10 ° C or in conditions of high humidity. Coverage 13-15sq.metres/litre per coat, depending on absorbency of surface. Maintenance The varnish will take 3 days to fully harden. Spills should be wiped-up immediately during this time to prevent damage. The surface can be cleaned as required with a mild detergent solution, do not use aggressive cleaning products. Re-coat the varnish as necessary, after cleaning and lightly sanding the surface. Compatibility Can be applied over either Rustin ’ s Wood Dye or Floor Dye , other brands may be incompatible. Bare wood may be bleached with Rustin ’ s Wood Bleach prior to varnishing. Not for use over scumbles or oil-based paints. Other types of coatings/stains may be incompatible, including acrylic paints and vinyl emulsion. If using anything other than Rustins Wood Dye or Floor Dye a test area should be coated to determine compatibility. Settlement Stir well before use. Satin and Matt finishes may dry glossy if not thoroughly stirred, check for settlement on the bottom of the tin and stir to mix-in. Shelf-life/Storage Many years if stored in normal conditions. Protect from frost. Hazards Non-flammable. Flash point: Nil. General good practice advice: avoid contact with eyes, skin and clothing. A Full Safety Data Sheet is available upon request. Clean-Up With water whilst wet. If dried-on, clean equipment and brushes with either Rustin ’ s Brush Restorer or Cellulose Thinners . _gsrx_vers_301 (GS 5.3.1 (301)) supreme Free eBay Tools supremeauctiononlinesoftware.automatic.gallery Free eBay Tools supremeauctiononlinesoftware.automatic.feedback Sellers: Get your own map of past buyers. Fast. Simple. Pay with PayPal: Get a MyStoreRewards invitation for cash back read more

Items in the Price Guide are obtained exclusively from licensors and partners solely for our members’ research needs.

Flag item for content or copyright

If this item contains incorrect or inappropriate information please contact us here to flag it for review.

If you are the originator/copyright holder of this photo/item and would prefer it be excluded from our community, contact us here for removal.