Tokyo Marui The Ninja 1/10 Shaft Driven 4WD RC Buggy 1980s Rare Scarce

Pricing & History

Sold for
Start Free Trial or Sign In to see what it's worth.
Sold Date
Source eBay

Tokyo Marui The Ninja 1/10 Shaft Driven 4WD RC Buggy 1980s Rare Scarce NOT A MINI OR 2WD! This kit was run only a few times, a long time ago. It was in storage, and taken apart and cleaned recently. The only part damage I found was that the rear screw mount for the mechanical speed control was cracked, but a longer screw is holding it in place well. The electronics (receiver, servos, and mechanical speed control) are the originals, but since I don't have a battery, motor, or transmitter to test with anymore, I decided to cut the wires and put them back in just for display purposes. No switch or motor. Shocks were topped off with shock oil, but are very stiff from not being used in a long time (may need full rebuild), wheels and tires have minimal wear, but definite 'soft spots'. Steel parts were soaked in oil and cleaned with a wire brush, Dremel, or sandpaper. All other parts were gently cleaned with dish soap and a toothbrush. All gears have been inspected, but if you actually wanted to run this, you would need to lube the gearboxes, replace all electronics, and upgrade to ball bearings. Driver figure is missing the front of his helmet. Body is a bit dinged up with no wing which should be ok if you actually run it (I wouldn't, kind of rare), but if you wanted to make this a FULL restoration/shelf queen project, the bulk of the read more

Items in the Price Guide are obtained exclusively from licensors and partners solely for our members’ research needs.

Flag item for content or copyright

If this item contains incorrect or inappropriate information please contact us here to flag it for review.

If you are the originator/copyright holder of this photo/item and would prefer it be excluded from our community, contact us here for removal.