USED Shure PSM-600 P6TRE3 Wireless System

Pricing & History

Sold for
Start Free Trial or Sign In to see what it's worth.
Sold Date
Source eBay

The System works excellent!! the only thing I have to mention is thatthe nozzles of the E3 earphones are a little bit broke but still can plug pretty good. Please see pictures below to review the nozzles of the earphones, works great. Retail Price on new Sure W. system is over $1200 USD. PAYPAL ONLY . More pictures or details upon request. Shure PSM-600 P6TRE3 Wireless System Features: The PSM 600 is recognized as the industry standard for full-featured wired and wireless in-ear systems Crystal-controlled analog operation for superior sound Full frequency range Great stereo separation Channel HC Includes: P6T transmitter, P6R receiver, PA715 Antenna and E3 earphones (with an extra new sleeve assortment with cleaning tool). PSM®600 Wireless Systems RF Carrier Frequency Range 626 to 862 MHz (country dependent) Audio Frequency Response 50 to 15k Hz (+0, 3 dB re 1KHz); earpiece dependent Operating Range 300 ft. (environment dependent) Modulation FM +/- 35 kHz Deviation (Nominal), MPX Stereo Channel Separation 35 dB typical Total Harmonic Distortion 0.8% typical (Ref. +/- 35 KHz deviation) Signal-to-Noise Ratio 80 dB typical (A-weighted) Operating Temperature -7 degrees C to +49 degrees C (20 degrees F to 120 degrees F) Polarity P6T audio inputs to P6R audio outputs: Non-inverting XLR: pin 2 positive with respect to pin 3 1/4-in. TRS: Tip positive with respect to ring P6T TRANSMITTER P6T Wireless Transmitter Key Features Built-in audio limiter 1/2 rack space Internal power supply Remotable/combinable antennas Operating Controls Input knob Operating mode (Stereo, Mono, MixMode) Earphone volume control Frequency select switch LED Indicators 8-segment input level Frequency Inputs Two line level XLR 1/4" combos Outputs Two 1/4" TRS loop outs Local earphone monitor P6R Wireless Bodypack Receiver Key Features Rugged metal chassis Operating Controls Operating mode (Stereo, Mono, MixMode Volume knob Balance knob Defeatable limiter High frequency boost Frequency select LED Indicators Power RF reception Low battery SCL3 Sound Isolating Earphones Single WideBand Microdrivers with incredible isolation for detailed tone across the frequency range. Specifications Frequency Range: 25Hz – 18.5kHz Sensitivity (at 1 kHz): 115 dB SPL/mW Impedance (at 1 kHz) 26 ohms Weight: 28g (.9oz) Output Connector: Gold-plated stereo, 3.5 mm (1/8-inch) phone plug Cable Length: 1.57 m (62 inches) RF Output Power 100 mW (+20 dBm) typical conducted (country dependent) Modulation Limiter Internal peak limiter (>10:1 compression) Antenna External whip, 50 ohm BNC connector Power Requirements P6T: 100 to 120 Vac, 50/60 Hz EP6T: 220 to 240 Vac, 50/60 Hz NOTE: This product is not disconnected from the mains power supply when the power switch is in the OFF position. Current 115 mAac maximum at 120 Vac 55 mAac maximum at 230 Vac Fuse P6T: 120 Vac, 160 mA/250 V time delay EP6T: 230 Vac, 80 mA/250 V time delay Dimensions 44.5 mm X 197.4 mm X 238.1 mm (1 3/4 in. X 7 3/4 in. X 9 3/8 in.) Net Weight 1.62 kg (3 lbs., 9 oz.) P6R RECEIVER RF Sensitivity 1.2 µV typical Image Rejection 70 dB typical Spurious Rejection 60 dB typical Squelch Threshold 4 µV typical Antenna Input Impedance 50 ohms typical Antenna External, threaded connector Power Requirements 9 V battery Battery Life 46 hours, volume dependent Audio Output Connector 3.5 mm Stereo (Left = tip, Right = ring, Ground = sleeve) Minimum Load Impedance 16 ohms Net Weight 0.52 lbs. Overall Dimensions 27.18 mm X 64.52 mm X 85.09 mm (1.070 in. X 2.540 in. X 3.350 in.) read more

Items in the Price Guide are obtained exclusively from licensors and partners solely for our members’ research needs.

Flag item for content or copyright

If this item contains incorrect or inappropriate information please contact us here to flag it for review.

If you are the originator/copyright holder of this photo/item and would prefer it be excluded from our community, contact us here for removal.