12 by 14 by 24 mm has 5 skewed poles double shafts

Pricing & History

Sold for
Start Free Trial or Sign In to see what it's worth.
Sold Date
Source eBay

This is a high quality Mashima Motor with 5 skewed poles. This motor is 12 mm wide by 14 mm high by 24 mm long. It has 2 1.5 mm double shafts and only draws 40 milliamps at 12 volts And cranks about 12,000 rpm The high quality 5 pole skewed armature motor will reduce coggng and with 2 shafts one or 2 flywheels are possible. I have another Ebay listing for most of the Mashima motors with or without flywheel custom made to fit your space. The magnets are high quality as the amp draw is low milliamps at 12 volts!! These type of iron core motors have been used in High end brass for years! 5 skewed poles is hard to beat. See Micro LocoMotion's e bay store for the same quality Mashima motors also available in: 9.3 by 13 by 15 mm 9.3 by 13 by 20 mm 1015 and 1020 and 1024 (10 mm by 12 mm by 15/ 20 and 24 mm) and 1220 and 1224 (12 by 14 by 20 and by 24 mm) version with 5 skewed poles and excellent for N scale also 13.6 by 15.8 mm by only 20 or 25 or 30 mm long. the above is called MH 1620/MH1624/MH1630 a few 16 mm cylindrical because they are out of production-the flat can has the same armature as the 16mm but will fit in tighter spaces because the shell has been reduced to fit!! 1824 1830 1832 double shaft Iron Core 1833 flat can with skewed armature. Thes e motors are all high power motors and are ideal for brass or plastic loco diesel or steam locos. Due to the skewing they flywheels a few seconds and that is enough to coast you through switchwork for several inches to prevent stalling the steam or diesel locomotive through dirty or rough track. Flywheels are available from the motorman to fit your size. Check my other Ebay listings for the same motors with flywheels This motor has 2 sets of bolt holes as specified on the spec sheet with the diameter of the bolt circle and the size of the threads. . These should fit most N scale HO Hon3, S scale and even O scale, ON3 and SN3 Narrow gauge diesel and steam. N scale HO Scale S scale ON3 O Scale These motors flywheel a few seconds because t hey have skew windings minimizing cogging and with a flywheel your locomotive will coast a few inches through dirty or rough trackwork!! Motorman can make custom flywheels to fit your space dramatically improving the non cogging effect!! This is a powerful motor and it will fit a lot of Steam, The motor will fit large Rivarossi HO steam. These motors will power the older HO Rivvy mallett, cab forward, challenger or big boy!! With the offset drive system. Dual motors are available in other ebay listings which will work with U joints to both gear towers, and even an offset gearhead in my current Ebay listings. The HO Cab Forward on The Motorman's website has coreless 16 mm by 24 motors with center shaft gearheads in 6.3 ratio and required milling of the chassis---A single motor at the rear may be easier to install. 2 of the 2020 or 2630 gearmotors motors will work. See other listings for these motors. If you have questions you may email Flywheels help model when the power is interrupted so takes you through dirty track and prevents stalling. Many more precision coreless motors and swiss gearheads available from the motorman See all of my listings!! ** Remotoring is for the advanced hobbyist who has the experience to understand the Engineering of locomotive scale speed and novice hobbyists may find the techno babble over there heads. Quality motors are more expensive because they have more poles and better magnets and iron cored motors need to be skewed and have 5 or more poles to eliminate cogging. These motors can be expensive in small quantities from the US factory importer!! 25.4 mm is 1 inch to convert divide by this factor or its inverse is .03937 16 mm divided by 25.4 or .6299 inches If you have q... read more

Items in the Price Guide are obtained exclusively from licensors and partners solely for our members’ research needs.

Flag item for content or copyright

If this item contains incorrect or inappropriate information please contact us here to flag it for review.

If you are the originator/copyright holder of this photo/item and would prefer it be excluded from our community, contact us here for removal.